Test Report of goat hair imitation filament in water-based P
Yangzhou Jingdu Brush Co.,Ltd
Test Report of goat hair imitation filament in water-based Painting
Principle:
1. Make the paint brush with the goat hair imitation filament , almost the same filling weight as customers
2. Put them in the Water-based paint for 6 minutes
3. Take out them until there is no paint drips and weight the paint brush
4. Paint on the Gypsum board until not smooth
5. Weight the paint brush again
The following are the details of paint brush we are making:
- Size: 6inch
- Lengthout: 57mm
- Thickness of stainless steel: 22mm
- Gule: Expory Gule
- Plug: Wooden Insert
Step 1: Weight the Paint Brush
Step 2: Put them in the Oil-based Paint for 6 minutes and take out until no paint drops
Step 3: Weight the brush separatly
Step 4: Paint on the Gypsum board until not smooth
Step 5: Weight the brush head after painting
The following are the Painting holding and Release Chart Comparing
|
Weight of Paint brush(Grams) |
Weight in the Painting (Grams) |
Absorption (Grams) |
Weight after releasing the painting (Grams) |
Release(Grams) |
Goat Hair Imitation Filament (JD)
|
200.10 |
273.30 |
73.20 |
230.00 |
43.30 |
Other Filament
|
198.70 |
255.20 |
56.50 |
222.00 |
33.20 |
Summary (Painting)
From the test and date, we found JD goat hair imitation filament is more painting holding and release than customer giving. Also painting more smooth compared with customers.
For more information, please contact with me directly: Phone/whatsapp:+86 13952544522
www.china-bristle.com
www.brush-filament.com
www.synthetic-filaments.com